A VRCORE Education experience

Walk the Groundbreakers Site

Alberta · Grades 4–12 · 60 minutes

Scroll down to walk through the six trade rooms of a school under construction, the way your students do in virtual reality.

Room 1

Plan & Survey

Every building starts with a plan. In the drafting office students unroll the school’s plans on the drafting tables, use a total station to find the four corners of the building’s footprint on the lot outside, and set blocks on a model of the school. Architects design the building; surveyors mark exactly where it goes.

Objectives

  • Read a Building Plan
  • Mark a Building’s Footprint

Room 2

Heavy Equipment

Before anything is built, the ground has to move. Students put on a hard hat to run a full-size excavator with real two-joystick controls, dig the trench and fill a dump truck load by load. They fit an auger, breaker or bucket to a mini excavator and pack loose soil with a plate compactor, three passes on every square.

Objectives

  • Move Earth Safely
  • Prepare the Ground for a Building

Room 3

Masonry

Now the walls go up. Working as a crew, students spread mortar with a trowel and set red bricks along the next course of the school’s ground-floor wall. Mortar comes first, then the brick, until the whole row is laid. Masons build with brick and stone made from the earth.

Objectives

  • Build a Wall in the Right Order
  • Work as a Crew

Room 4

Carpentry

The upper floor goes up in wood. Students lay studs on the marks between two plates, nail both ends with a hammer or nail gun, then lift the finished frame together until it stands. They brace it and check it is plumb with a spirit level before a telehandler carries it to the stack of finished walls.

Objectives

  • Frame a Wall
  • Raise and Check a Wall as a Team

Room 5

Welding & Metal

Steel holds up the gym’s wide roof. At the welding tables students lower their shields and run the torch along each seam, then grind the welds smooth. At the bolt-up station they put bolts through a steel beam and tighten each one with a wrench. Welders join metal; ironworkers bolt it together.

Objectives

  • Join Metal Two Ways
  • Protect Yourself on the Job

Room 6

Electrical

The school is built but dark. Students switch the main power off at the panel, carry a cable coil from box to box to wire plug, plug, switch and wall light, then turn the power back on and watch the school light up.

Objectives

  • Follow a Safe Order of Work
  • Complete a Circuit

Which trade would you pick?

Six rooms, six trades and one school built by the end of the hour.

Lesson facts

Region
Alberta
Grades
4–12
Duration
60 minutes
Group size
15–40 students, depending on the operator

Skills

  • Communication and Collaboration
  • Following Procedures
  • Measurement and Data
  • Physical Manipulation
  • Real-World Connections
  • Spatial Reasoning
  • Systems Thinking
  • Teamwork in Missions
View Lesson

Put Your Class on the Crew

Groundbreakers is a 60-minute VR field trip for Alberta classes in Grades 4–12. We bring it to your school.

Book Now