Lesson details
Ground Breakers
Alberta · Grades 4-12 · 60 minutes

Students put on hard hats and build a school together, one trade at a time. In six rooms of a real-scale construction site they survey the land, run an excavator, lay bricks, frame and raise a wall, weld and bolt steel, and bring in the power.
Every building starts as a plan and ends with the lights switching on. In Groundbreakers the whole class walks through a full-size construction site in VR and builds the VRCORE Education school from the ground up.
The site is split into six rooms, one for each trade, and every room shows the same school at the next stage of construction. Students roam freely and join crews of up to 12 classmates. They pick up real tools, carry materials and use their whole bodies to get each job done. Nothing is multiple choice: the work itself is the answer.
Along the way the guide trio, Commander Chase Carroway, Dr. Camilla Ingram and Specialist Emmett Powers, explain what each trade does, why the safety rules matter and how people train for these careers. Hard hats go on at the start and stay on for the whole site.
The lesson ends with a wrap-up where students look back on six real careers and talk about which trade they would choose.
Lesson facts
- Region
- Alberta
- Grades
- 4-12
- Duration
- 60 minutes
- Group size
- 15–40 students, depending on the licensee or franchisee
- Offered in
- Calgary
- Availability
- Bookable · Book this lesson
Curriculum connections
Learning objectives
- Read a Building Plan: Students lay out the school’s plans and connect the drawing to the real lot.
- Mark a Building’s Footprint: Students use a surveyor’s total station to locate each corner of the building on the ground.
- Move Earth Safely: Students operate an excavator only with a hard hat on and learn how each joystick moves the machine.
- Prepare the Ground for a Building: Students dig, haul and compact soil to explain why a site needs firm, level ground.
- Build a Wall in the Right Order: Students spread mortar before each brick and explain what mortar does.
- Work as a Crew: Students share the course with classmates and finish a full row of brickwork together.
- Frame a Wall: Students place and fasten studs to build the skeleton of a wall.
- Raise and Check a Wall as a Team: Students lift a wall together and use a level to check it is straight up and down.
- Join Metal Two Ways: Students weld seams and bolt a beam, and compare how each holds steel together.
- Protect Yourself on the Job: Students use a welding shield and explain why eye protection matters.
- Follow a Safe Order of Work: Students switch the power off before working and back on only when the job is ready.
- Complete a Circuit: Students connect power from the panel to a light and see how the parts work as one system.
Alberta curriculum outcomes
Curriculum outcomes for Alberta have not yet been added.
Grades
- Grade 4
- Grade 5
- Grade 6
- Grade 7
- Grade 8
- Grade 9
- Grade 10
- Grade 11
- Grade 12
Skills
- Communication and Collaboration
- Following Procedures
- Measurement and Data
- Physical Manipulation
- Real-World Connections
- Spatial Reasoning
- Systems Thinking
- Teamwork in Missions
Activities
Plan & Survey
Every building starts with a plan. In the drafting office students unroll the school’s plans on the drafting tables, use a total station to find the four corners of the building’s footprint on the lot outside, and set blocks on a model of the school. Architects design the building; surveyors mark exactly where it goes.
| Objective | Description |
|---|---|
| Read a Building Plan | Students lay out the school’s plans and connect the drawing to the real lot. |
| Mark a Building’s Footprint | Students use a surveyor’s total station to locate each corner of the building on the ground. |
Heavy Equipment
Before anything is built, the ground has to move. Students put on a hard hat to run a full-size excavator with real two-joystick controls, dig the trench and fill a dump truck load by load. They fit an auger, breaker or bucket to a mini excavator and pack loose soil with a plate compactor, three passes on every square.
| Objective | Description |
|---|---|
| Move Earth Safely | Students operate an excavator only with a hard hat on and learn how each joystick moves the machine. |
| Prepare the Ground for a Building | Students dig, haul and compact soil to explain why a site needs firm, level ground. |
Masonry
Now the walls go up. Working as a crew, students spread mortar with a trowel and set red bricks along the next course of the school’s ground-floor wall. Mortar comes first, then the brick, until the whole row is laid. Masons build with brick and stone made from the earth.
| Objective | Description |
|---|---|
| Build a Wall in the Right Order | Students spread mortar before each brick and explain what mortar does. |
| Work as a Crew | Students share the course with classmates and finish a full row of brickwork together. |
Carpentry
The upper floor goes up in wood. Students lay studs on the marks between two plates, nail both ends with a hammer or nail gun, then lift the finished frame together until it stands. They brace it and check it is plumb with a spirit level before a telehandler carries it to the stack of finished walls.
| Objective | Description |
|---|---|
| Frame a Wall | Students place and fasten studs to build the skeleton of a wall. |
| Raise and Check a Wall as a Team | Students lift a wall together and use a level to check it is straight up and down. |
Welding & Metal
Steel holds up the gym’s wide roof. At the welding tables students lower their shields and run the torch along each seam, then grind the welds smooth. At the bolt-up station they put bolts through a steel beam and tighten each one with a wrench. Welders join metal; ironworkers bolt it together.
| Objective | Description |
|---|---|
| Join Metal Two Ways | Students weld seams and bolt a beam, and compare how each holds steel together. |
| Protect Yourself on the Job | Students use a welding shield and explain why eye protection matters. |
Electrical
The school is built, but it is dark inside. Students turn the main power off at the panel, hang three extension cords on the stud wall, and put a work light together. Then they switch the power back on, flip the switch and watch more of the school’s windows light up. Electricians bring in the power, safely.
| Objective | Description |
|---|---|
| Follow a Safe Order of Work | Students switch the power off before working and back on only when the job is ready. |
| Complete a Circuit | Students connect power from the panel to a light and see how the parts work as one system. |